M12 Molding 5pins A Code Female Straight Connector To Solenoid
Valve Type B 2+PE Plug
Product description
♦ Waterproof M12 Male & Female Front Mount.
♦ IP68 waterproof connectors to cable assemblies.
♦ Compliant with the RoHS Directive.
♦ The M12 molded cable cordsets handled by Major Electronix can be
used in many different applications because of their adaptability
and plug-and-play capabilities
♦ They are most ideally useful for applications with actuators and
sensors. Sometimes referred to as Micro DC or MDC
♦ M12 molded cables are made from yellow PUR or PVC which is oil
resistant
General Details
Contacts: 5pins and 2+PE 3+PE
Connector design: molding connector and solenoid valve
Connector locking system: central bolt
Termination: screw clamp
Wire gauge (mm): min. 0,34 mm², max. 1,5 mm²
Wire gauge (AWG): min. AWG 22, max. AWG 16
Cable outlet: 6,0 - 8,0 mm
Upper limit temperature: 120 °C
Lower limit temperature: -30 °C
Electrical values
Rated current (40 °C): 4 A
Rated voltage: 30 V
Pollution degree: 3
Overvoltage category: III
Insulating material group: III
Volume resistivity: ≤ 15 mΩ
Insulation resistance: ≥ 10¹⁰Ω
EMC compliance: not shielded
Degree of protection: IP65
Mechanical operation: > 50 Mating cycles
Material
Contact material: CuSn (bronze)
Contact plating: Ni (nickel)
Contact body material: PA (UL 94 HB)
Housing material: PA
M12 Connector Data
| Pin No. | 3 | 4 | 5 | 8 | 12 | 17 |
| Coding: | A | A | A | A | A | A |
| Standard | IEC61076-2-101 |
| Rated current | 4A | 4A | 4A | 2A | 1.5A | 1A |
| Rated voltage+ | 250V | 250V | 60V | 30V | 30V | 30V |
| Operating Temperatur | -25℃~85 ℃ |
| Degree of protection | IP67 |
| Connector locking system | Solder |
| Mechanical operation | >500 mating cycles |
| Contact resistance | ≤10mΩ |
| Material of connector | CuZn |
| Contact plating | Au(gold plating) |
| Material of connector body | Cu,Epoxy resin |
Component part drawing
| Connector type | m12 to selnoid valve connector |
| Contacts | 2+PE 3+PE / 5PINS |
| Gender | female |
| Degree of protection | IP65 |
| Size of tail | PG7 or PG9 |
Product photos
FAQ
Q1. What kind of connectors you could supply?
A: M8, M12, M16, M23, Industrial waterproof connector, weipu
connector, solenoid valve connector etc, also can customized based
on buyer's requirements as long as tell us your details
Q2: How can I get a connector’s sample?
Sample in stock is free; you just need to pay shipping cost.
Q3: Is it OK to print my Logo on the product?
A: Yes, OEM/ODM service is available.
Q4: How to contact us?
A: contact us with email/whatsapp/wechat
